H

Pressure test at temperature to confirm seals.

Preformed thermoplastic sheets/tape applied with heat for quick symbols/legends.

Stores energy to smooth pressure spikes.

A hydraulic breather cap is fitted to hydraulic reservoirs to allow air to enter and exit as fluid levels change during operation. This pressure equalisation helps protect seals and supports stable reservoir behaviour during heating, cooling, and hydraulic actuation. Breathers typically incorporate filtration to reduce the risk of dust and moisture entering the system. If…

Valve that locks flow if a hose ruptures on a raised body. Prevents uncontrolled descent of the hopper or boom.

Hydraulic hose identification tags are durable markers used to label hydraulic hoses so their function, routing, or specification can be identified quickly during inspection and maintenance. On vehicles with dense hose routing, clear identification reduces time spent tracing circuits and helps prevent connection errors. Tags may reference hose size, pressure rating, circuit IDs, or fleet-specific…

Replaceable cartridge that removes particles from the sweeper’s hydraulic circuit. Routine replacement prevents valve wear and system failures.

A hydraulic oil heater is used to warm hydraulic fluid to a workable temperature in cold conditions. It helps reduce high viscosity during start-up and supports predictable hydraulic response when equipment is first put into service. Cold oil can lead to sluggish actuation and added strain on pumps and seals. Pre-heating reduces resistance and improves…

A hydraulic oil temperature sensor monitors the operating temperature of hydraulic fluid within a system. It provides feedback to displays or control units so conditions can be monitored during use. Excessive oil temperature can reduce lubrication performance, accelerate wear, and increase the likelihood of seal damage or system faults. Monitoring helps operators identify issues early…

Switch signalling when target pressure is reached.