H

A hot melt filter basket is a high-temperature filtration component used within thermoplastic road marking systems. It filters molten material before it reaches applicators or nozzles, helping reduce blockages and flow disruption. Filter baskets are inspected and cleaned as part of routine equipment checks, particularly where material contamination or reheating affects quality. This component is…

Portable kit for drawing oil samples safely from pressurised lines. Enables predictive-maintenance analysis without downtime.

Pressure test at temperature to confirm seals.

Preformed thermoplastic sheets/tape applied with heat for quick symbols/legends.

Stores energy to smooth pressure spikes.

A hydraulic breather cap is fitted to hydraulic reservoirs to allow air to enter and exit as fluid levels change during operation. This pressure equalisation helps protect seals and supports stable reservoir behaviour during heating, cooling, and hydraulic actuation. Breathers typically incorporate filtration to reduce the risk of dust and moisture entering the system. If…

Valve that locks flow if a hose ruptures on a raised body. Prevents uncontrolled descent of the hopper or boom.

Hydraulic hose identification tags are durable markers used to label hydraulic hoses so their function, routing, or specification can be identified quickly during inspection and maintenance. On vehicles with dense hose routing, clear identification reduces time spent tracing circuits and helps prevent connection errors. Tags may reference hose size, pressure rating, circuit IDs, or fleet-specific…

Manual line painting kit for small corrections and car parks.

Tank fitted with an immersion heater to keep water above freezing. Guarantees effective dust suppression during sub-zero operations.