T

Valve that relieves pressure caused by thermal expansion in closed binder circuits. Prevents hose rupture on hot days when system is idle.

Specified emulsion rate for tack coats.

Temperature sensor monitoring binder within the sprayer tank.

Guard preventing access under tail lift.

Rack used to hold newly-cast thermoplastic line sections during cooling. Prevents warping and ensures consistent thickness before installation.

Hydraulic locking device holding the hopper door closed during transit. Prevents accidental opening due to vibration or pressure build-up.

Heated head applying molten thermoplastic under pressure. Produces crisp raised lines with excellent durability.

Switch preventing tail-lift operation while hopper is raised. Protects against inadvertent contact with the lifted body or tip-ram mechanism.

Pelletised thermo feedstock for kettles and extruders.

Sticker set warning of crush hazards around the tail lift. Part of required visual-safety markings for LOLER compliance.