R

Oil cooler on hydraulic return line.

Tray test measuring chippings kg/m².

Portable tray placed under filler caps during refuelling. Catches drips and complies with UK Environmental Agency pollution-prevention guidance.

Steel housing holding the hydraulic-oil return filter. Captures debris before oil re-enters the reservoir extending pump life.

Guard preventing broom from striking obstacles.

Periodic cleaning cycle reversing airflow to clear filters/ducts.

Flow meter measuring oil returning to tank. Used for diagnostics to confirm correct operation of hydraulic circuits.

Washer jet to keep rear camera clear.

A regenerative air sweep system is a specialist air-blast sweeping method that recirculates airflow rather than exhausting it after a single pass. By reusing air within a largely recirculating circuit, the system maintains consistent sweeping performance while reducing overall energy demand compared with conventional blow-off designs. During operation, used airflow is captured and redirected back…

Oil cooler installed in the hydraulic-return line to dissipate heat. Maintains optimum oil viscosity and extends component life.