Q

Field test measuring skid resistance of resin-bound surfaces using portable pendulum testers. Confirms compliance with UK TRRL standards.

Protective cap fitted to hydraulic quick couplers when disconnected. Prevents ingress of dirt and grit that could damage internal seals.

Saved controller profile for rapid setup.

Mix of clear binder and graded quartz grit used for anti-skid surfacing. Provides high friction without altering line colour or retro-reflectivity.

Self-sealing coupling fitted in the fuel line to simplify auxiliary-engine removal. Prevents spillage and reduces air ingress during servicing.

Pre-built cores swapped to minimise downtime.

Infra-red quartz lamp used for curing paint or resin markings. Enables same-day reopening of small works areas.

Manifold assembly enabling simultaneous drainage of all water tanks. Shortens end-of-shift wash-down and prevents winter freeze damage.

High output burner for rapid binder heat‑up before shift start.

Fine sand broadcast onto fresh surface dressing to improve skid resistance. Commonly specified on UK rural roads with steep gradients.