O

Shoe offset to reach near kerb lines.

Fresh‑water tank feeding dust suppression and jetting circuits.

Sight glass for quick oil checks.

System enabling real-time calibration of flow meters through the controller. Simplifies compliance checks before a new season’s dressing campaign.

Filter placed on the hydraulic oil return line. Protects the reservoir from contamination and extends oil change intervals.

Diagnostic connector allowing laptop access to vehicle ECUs. Used by UK service engineers for fault finding and firmware updates.

Trap removing oil from water recirculation.

Gauge displaying hydraulic-oil temperature on the control panel. Prevents overheating and indicates when the system is ready for heavy use.

Valve regulating flow through the hydraulic-oil cooler. Keeps fluid within the 40–70 °C optimum temperature range for long component life.

Tray positioned beneath oil filters during draining. Captures hot oil safely and prevents environmental spills.