M

Port for measuring manifold pressure.

Primary pump supplying oil to all sweeping circuits. Driven from the PTO and sized to deliver flow for fan brooms and tipping hydraulics.

Valve limiting maximum pressure within a hydraulic manifold. Protects hoses and actuators from overload conditions.

Manual screw allowing precise broom-height setting. Keeps constant ground contact as bristles wear down.

Sensor monitoring manifold-block temperature to prevent overheating. Shuts off pump if oil temperature exceeds limits.

Gauge showing downward pressure applied by the main broom. Helps the operator set correct pressure for different surfaces.

Physical switchbank allowing operation of vital functions if the touchscreen controller fails. Provides operational redundancy on site.

Sensor detecting fan-shaft rpm for performance monitoring. Allows controller to adjust load dynamically and maintain suction.

Hand-operated valves for spray bar sections during fallback mode.

Engraved plate listing key service intervals and hydraulic fluid types. Mounted inside the engine bay for quick technician reference.