D

Replaceable liner protecting suction duct bends from abrasion.

Pipe extension allowing operators to drain tanks from ground level. Improves safety by removing the need to climb onto the chassis.

Hanging curtain around nozzle to confine dust.

Narrow rotary brush designed for cleaning linear drains and slots. Often fitted to municipal sweepers working near kerb lines.

Auxiliary fan extracting dust from enclosed areas such as milling machines. Often paired with sweepers during road-planing operations.

Fan driven via shaft rather than belts for efficiency.

A drive-axle load sensor is an electronic sensor that measures the load applied to a vehicle’s drive axle. The signal is used by onboard control systems to optimise traction, braking balance, and stability as conditions change. Load variation can be caused by payload changes, suspension movement, and uneven road surfaces. Accurate sensing supports vehicle stability…

Air separator between suction nozzle and fan that removes heavier dust particles. Reduces filter clogging and extends fan service life.

Transparent inspection window on hopper side. Allows the operator to check fill level without opening doors or interrupting suction.

Spiral auger that moves collected material from pickup head to hopper inlet. Maintains flow even when sweeping heavy wet grit.